TranslateBulk commissioning
To save more time when users are doing the commissioning, especially when users have a larger network, Koolmesh supports the function of bulk setting. In this section, users can set the luminaire or motion sensor or emergency devices in batch volume independently. For every independent part, Koolmesh has a default setting which the user can apply accordingly. If not, users also can copy the parameters directly from exciting devices or modify all the parameters (more settings can refer to Luminaires /motion sensor/ emergency sections). Also, users can clear data via bulk commissioning.
● Set luminaire parameters in batch volume
Users can review the system default and all existing profiles for luminaires. Those profiles with 
are created by others and cannot be deleted or edited, like "Customer profile" and "Dali dimmer". For those profiles created by the user can be deleted by sliding to the left side. There are two ways to create and apply a new profile. More details about luminaire setting can refer to Luminaires setting.
① Copy parameters from an existing device and then “Choose” the device user would like to copy and "Next" Luminaire parameters, user can rename the profile and change the parameters based on the existing profile.
After that, users can click 
to save and “Next” to select the devices the user would like to apply and "start setting". After it is finished, this profile can appear in the "Select a profile" page, like Hallway 2 (HBHC25) (2), copy Hallway 2 (HBHC25) (2) ‘s setting to apply on the office's luminaires "Office 4 (HED8045-BT)", profile name as Hallway.
② Click "Add a new profile" to name the profile and set all the parameters of the luminaires and click to save and "Next" to select the devices user would like to apply and “start setting”. After it is finished, this profile can appear in the “Select a profile” page.
● Set motion sensor parameters in batch volume
Setting process please refer to "Set luminaire parameters in batch volume". But please be aware that the "Microwave detection range" will only function on microwave sensor; The "Sensor range", "Static sensitivity", and "Motion sensitivity" will only function on true presence motion sensors.
Set emergency parameters in batch volume please refer to "Set luminaire parameters in batch volume".
● Clear data
